Model 2820
2,820 sq ft · 3 bedrooms · 2 baths · office and media room · 2-car garage
Model 2820 is a single-story ranch home with a standing seam metal roof, insulated concrete form (ICF) walls and a covered porch that wraps around three sides, built by Isaacson Homes, a licensed custom home builder in southern Arizona, in Sonoita. Its 2,820 square feet include three bedrooms and two baths, an office, a media room, a great room open to a kitchen with an island and a breakfast nook, a dining room and a master suite with a walk-in closet, a jetted tub and a tiled walk-in shower. It has 1,660 sq ft of covered patio and a 906 sq ft two-car garage with a storage area. The plan was drawn by A.A. Gray Design.
At a glance
| Living area | 2,820 sq ft |
| Bedrooms | 3, including the master suite |
| Bathrooms | 2 full baths |
| Extra rooms | Office, media room, breakfast nook, pantry, laundry room |
| Ceilings | 9 ft |
| Garage | 2-car with storage area, 906 sq ft |
| Covered patio | 1,660 sq ft wrapping three sides of the home |
| Walls | 10-inch insulated concrete form (ICF) exterior walls |
| Roof | Standing seam metal with concealed fasteners |
| Floors | Stained concrete scored in a diagonal tile pattern |
| Stories | Single story |
| Drafter | A.A. Gray Design |
| Built in | Sonoita, AZ |
Floor plan
The front door opens to a foyer framed by arched openings, with the dining room on one side and a media room behind French doors on the other. The great room sits at the center of the home with double doors to the back covered patio, and opens to the kitchen with its island, pantry and breakfast nook. Two bedrooms with walk-in closets share a hall bath on one side, near the laundry room and the door to the two-car garage. The master suite on the other side has a long walk-in closet, a door to the patio and a bath with a double vanity, a jetted tub, a private toilet room and a walk-in shower, and the office sits next to it at the front.
General layout for illustration only, not to scale. Call us for the full plan; it can be adjusted to fit your lot and how you live.
About this home
Model 2820 is a long single-story ranch home with a standing seam metal roof and a covered porch that wraps around the front, back and one side, carried on posts with stone bases and finished with a tongue and groove wood ceiling. Its exterior walls are 10-inch insulated concrete forms, and the attics are insulated with open cell spray foam.
Inside, stained concrete floors scored in a diagonal tile pattern run through the home, and a series of arched openings link the foyer, hallways and great room. Wood-trimmed doors and windows and divided-lite wood French doors at the office add warmth. The kitchen has granite counters, an island, a stainless chimney hood over the cooktop, pendant lights and a travertine backsplash.
The master bath has a double granite vanity with stained glass light fixtures, a jetted soaking tub under a window and a tiled walk-in shower with a bench and pebble floor. The hall bath has a tub and shower combination with a travertine surround.
Highlights
- Covered porch wrapping three sides, 1,660 sq ft
- Insulated concrete form walls and standing seam metal roof
- Stained concrete floors and arched openings
- Office and media room with wood French doors
- Kitchen with island, chimney hood and breakfast nook
- Master suite with jetted tub and walk-in shower
- Two-car garage with storage area
Photo gallery
Exterior and covered porch
Entry, great room and kitchen
Master suite
Bedrooms, office and baths
Build this plan
You can build Model 2820 as shown, change it to fit how you live, or use it as a starting point for a completely custom design. We build on your lot or one of ours, throughout Sierra Vista, Hereford, Palominas and southwest Cochise County.
Questions about this plan
Can I change the floor plan?
Yes. Most clients adjust a plan, such as room sizes, the garage or the patio, and we can also design a completely custom home.
Can you build on my lot?
Yes. We build on your property anywhere in our service area, or we can help you find a lot. See our lots for sale.
How long does it take to build?
Plans usually take 3 to 8 weeks. Once the building permit is issued, construction of a home this size typically takes about 8 to 12 months. The exact timeline depends on your selections and on supply chain logistics. If speed is an issue, discuss it with us in the bidding stage. We can guide you with time saving designs, procedures, and selections.
What does it cost to get started?
A new design drawing is $2,000 to $6,000, or if you pick an existing design, it can be modified at a fraction of the cost. Due to the large variety of custom selections, a price cannot be given online. We do a complete bid, with a generic price for appliances, plumbing and electrical fixtures.
Are your homes energy efficient?
Yes. Isaacson Homes was an ENERGY STAR partner for more than a decade, starting in 2009, and built ENERGY STAR certified homes. We still use many of the same energy-saving building methods and can include them in any home we build, even when it isn’t formally certified. Grid-tie solar is also available.
Talk to us about Model 2820
Call or email Philip Isaacson to talk about this plan, pricing or your lot.
Isaacson Homes, LLC · Licensed Arizona contractor, ROC #208853 · Hereford, AZ